- Transmits and receives data via High-speed a serial USB interface
- Document Scanner,duplex scanner
- Scans documents at 17 IPS @ 200 DPI
- ezscan,oem scanners
- Automatically transports and scans forms forward or reverse (bi-directionally)
- page scanner,scanner
- Scans forms from a full-page size (A4) down to forms as small as 3.15″” square
- scanner read heads,Scanners
- Converts pixel data to 8-bit grayscale or 256 shades of gray and then transmits this data via a standard USB 1.1 or 2.0 interface
- usb image scanner,usb scanner
- Can capture and decode optical mark-sense (OMR) data as well as OCR and barcode data
- Document Scanner,duplex scanner
- Equipped with firmware download
- capability and self-test features
DC POWER REQUIREMENTS
+5 VDC 5% @ 0.6 A
+24 VDC 5% @ 1.2A (motor running), 2.4 A (surge)
WEIGHT
The total weight of the scanner, including mechanism and PC assemblies, is approximately 4 lbs.
DATA DETECTION
Scan head is a linear photodiode sensor array containing 1728 pixels at 8 dpm (200 dpi).
Scanning is reflective with advanced light sources (wavelength 660nm) for shadow-free illumination.
DOCUMENT SPEED/TRANSPORT TIME
Transport scanning speed = 17 ips (minimum) @ 200 dpi
Transport speed (printing/branding) = 1.1 ips @ 180 lines/inch
2.2 ips @ 90 lines/inch
Note: Transport speed can be reduced (under external command) for form ejection.
Typical transaction (transport) time:
For 8-inch long selection slip = 0.5 seconds (200 dpi).
For 11-inch long full-page = 0.7 seconds (200 dpi).
IMAGE DATA
Bitmap image data format is command selectable as either:
8-bit grayscale data (1 pixel per 8-bit data byte)
Bitonal (B/W) data (8 pixels per data byte)
TEMPERATURE
Operating: 0o C to + 50oC
Storage: -25oC to + 60oC
HUMIDITY
Operating: 10 to 85% RH non-condensing
Storage: 5 to 95% RH non-condensing